圖片僅供參考
| FLYiNG 零件編號 | ICSGM4591XTS24GTRSGMICRO |
| FLYiNG 散料庫存 | 11 |
| FLYiNG 標準包裝庫存 | 電洽/Contact |
| 製造商/品牌商 | SGMICRO |
| 製造商/品牌商零件編號 | SGM4591XTS24G/TR |
| 說明 | SGM4591XTS24G/TR TSSOP-24 SGMICRO |
| 無鉛狀態 / RoHS 指令狀態 | ROHS3 合規 |
| IC | Low Voltage 16-Bit I2C and SMBus Low-Power I/O Expander |
| 製造商 | SGMICRO |
| 系列 | SGM4591 |
| 原廠料號 | SGM4591XTS24G/TR |
| 電源電壓 | -0.5V~6V |
| 輸入電壓 | -0.5V~6V |
| 輸出電壓 | -0.5V~6V |
| 工作溫度 | -65°C~150°C |
| 封裝／外殼 | TSSOP-24 |
| 安裝類型 | SMD 表面黏著式 |
| 無鉛狀態 RoHS | ROHS |
| 標準包裝數量 | 4000/Reel |
文件:SGM4591.png)
SGM4591
Low Voltage 16-Bit I2C and SMBus Low-Power I/O Expander
GENERAL DESCRIPTION
FEATURES
SGM4591
Low Voltage 16-Bit I2C and SMBus Low-Power I/O Expander
GENERAL DESCRIPTION
The SGM4591 is a general-purpose parallel input and output (I/O) expander device, which consists of two lanes and 8 bits parallel I/O expansion. The device communicates with processor through two-line bidirectional I2C bus (or SMBus), supporting I2C standard mode (100kHz) and I2C fast mode (400kHz) clock frequency. The SGM4591 provides a simple solution for the devices that need additional I/Os, such as LEDs, buttons, sensors, etc.
The SGM4591 can select device address by the A0 and A1 pins. The SGM4591 features an interrupt generated on the nINT whenever the state of input port changes. An output anomaly may also be indicated by the nINT pin when the corresponding Output Anomaly Indication port register is set to 1 and the device is in push-pull output mode. The SGM4591 can cycle the power supply and cause a power-on reset to reset itself to the default state. In addition, the device can use a hardware nRESET pin to reset itself to the default state.
The SGM4591 is available in Green TSSOP-24 and TQFN-4×4-24FL packages and supports -40 °C to +125°C temperature range.
The SGM4591 can select device address by the A0 and A1 pins. The SGM4591 features an interrupt generated on the nINT whenever the state of input port changes. An output anomaly may also be indicated by the nINT pin when the corresponding Output Anomaly Indication port register is set to 1 and the device is in push-pull output mode. The SGM4591 can cycle the power supply and cause a power-on reset to reset itself to the default state. In addition, the device can use a hardware nRESET pin to reset itself to the default state.
The SGM4591 is available in Green TSSOP-24 and TQFN-4×4-24FL packages and supports -40 °C to +125°C temperature range.
FEATURES
- 1.65V to 5.5V Input Voltage Range
- Parallel I2C I/O Expander
- 5V Tolerant Input and Output Ports
- Active Low Reset Input
- Active Low Interrupt Output
- Support 400kHz I2C Fast Mode
- Internal Power-on Reset
- No Glitch on Power-up
- Polarity Inversion Register
- Compatible with Most Processors
- Select Device Address by Two Pins (up to Four Devices)
- Latched Outputs Drive LEDs Directly
- Latch-up Performance (>100mA) to Meet JESD 78 Class II Standard
- -40°C to +125°C Operating Temperature Range
- Available in Green TSSOP-24 and TQFN-4×4- 24FL Packages
- I2C GPIO Expansion
- Industrial, Factory, Building, Test and Measurement
SGM4591
低電壓 16 位元 I2C／SMBus 低功耗 I/O 擴充器
產品說明
SGM4591 為一款通用型並列輸入／輸出擴充器，內部包含兩組通道，提供 16 位元並列 I/O 擴充能力。裝置透過雙線雙向 I2C 匯流排或 SMBus 與處理器通訊，支援 100kHz 標準模式與 400kHz 快速模式時脈，能為需要額外 I/O 的系統提供簡單且有效的擴充方案，例如 LED、按鍵及感測器等應用。
SGM4591 可透過 A0 與 A1 腳位進行裝置位址設定。當任一輸入埠狀態發生變化時，會透過 nINT 腳位產生中斷訊號；在推挽式輸出模式下，若對應的輸出異常指示暫存器設定為啟用，輸出異常亦可由 nINT 腳位顯示。裝置支援電源循環復位，可於上電時自動回復至預設狀態，亦可透過硬體 nRESET 腳位強制重設至預設狀態。
SGM4591 提供符合環保規範的 Green TSSOP-24 與 TQFN-4×4-24FL 封裝，可在 −40°C 至 +125°C 的溫度範圍內穩定運作。
產品特性
- 操作電壓範圍：1.65V 至 5.5V
- 並列式 I2C I/O 擴充架構
- I/O 埠支援 5V 容忍
- 低電位有效重置輸入
- 低電位有效中斷輸出
- 支援 400kHz I2C 快速模式
- 內建上電重置功能
- 上電時無毛刺輸出
- 具備輸出極性反轉暫存器
- 相容於多數處理器平台
- 透過兩個腳位進行裝置位址選擇，可支援最多四顆裝置
- 鎖存式輸出可直接驅動 LED
- 抗鎖定能力大於 100mA，符合 JESD78 Class II 標準
- 操作溫度範圍：−40°C 至 +125°C
- 提供 Green TSSOP-24 與 TQFN-4×4-24FL 封裝
應用領域
- I2C GPIO 擴充
- 工業設備、工廠自動化、建築系統
- 測試與量測設備
